You are here: Home » News » Vietnam Manufacturing Base — Padlocks Built in Hưng Yên

Vietnam Manufacturing Base — Padlocks Built in Hưng Yên

Views: 1     Author: Site Editor     Publish Time: 2026-11-04      Origin: Site

TOKING has been manufacturing lock and door hardware since 2002 in Hangzhou, China. In 2024 we added a second production base: our own padlock factory in Hưng Yên, Vietnam, operated by TOKING INDUSTRIAL VIETNAM CO., LTD.

The Vietnam plant is built around padlocks. Brass padlocks in long and short shackle versions, and laminated steel padlocks on a blue base, run on dedicated lines with a monthly capacity of 200,000 pcs. That capacity is not a plan on paper — we already supply major US DIY retail chains on a stable, repeat-order basis from this site.

Why a second base matters to buyers. A dual manufacturing base in China and Vietnam gives you two things a single plant cannot: an alternative origin for the same drawing and the same quality standard, and a shorter, more predictable route for the North American market. For padlock programmes, the Vietnam base is usually the better fit where tariff exposure and lead time matter more than unit cost.

Quality control stays in-house. Every batch passes in-house tensile testing on the shackle, plus salt-spray and cycle testing on the locking mechanism. Brass bodies carry an anti-rust coating rated for outdoor use; boron-steel shackles are specified for cut and pry resistance. The site operates under ISO 9001:2015, certificate 102726012000138000.

What we make there. Keyed-alike and master-key systems, custom logo, custom packaging and key numbering — the everyday work of an OEM padlock programme rather than a special request. Assembly and packing lines are on site, so private-label cartons and keying sets are finished before they leave Hưng Yên.

How the two bases work together. Both plants build to the same drawings and the same inspection sheets, so a programme can start in Hangzhou and move to Vietnam, or run in parallel across both, without a second qualification cycle. Engineering, tooling and power-product lines (inverters, portable power stations, chargers) remain in Hangzhou; the Vietnam base is dedicated to lock and hardware production.

Talk to us about your padlock programme at manager@tkindustrial.cn, or see the padlock range on this site.

Frequently asked questions

Where is the TOKING factory in Vietnam?
In Hưng Yên province, northern Vietnam, operated by TOKING INDUSTRIAL VIETNAM CO., LTD. It is our own plant, not a subcontracted workshop, and it runs under the same drawings and inspection sheets as our Hangzhou base. Padlock assembly, keying and packing are all done on site.

How much padlock capacity does the Vietnam plant have?
Monthly capacity is 200,000 pcs across brass and laminated steel padlocks, with in-house assembly and packing lines. Capacity is consumed by running programmes for major US DIY retail chains, so new volumes are planned per order rather than promised off a rate card.

Which padlock types are made in Vietnam?
Brass padlocks in long and short shackle versions with anti-rust coating for outdoor use, and laminated steel padlocks on a blue base with boron-steel shackles for cut and pry resistance. Keyed-alike and master-key systems, custom logo, packaging and key numbering are available on both.

Is the Vietnam plant certified, and can you supply under our own brand?
The site operates under ISO 9001:2015, certificate 102726012000138000, with in-house tensile, salt-spray and cycle testing per batch. OEM and ODM programmes run as standard: your logo, packaging, keying and numbering, produced and packed before shipment. Enquiries go to manager@tkindustrial.cn.

GET IN TOUCH
Address:A-202 Zhongtian Mcc,Tongpu Road Across Xidoumen Road,Hangzhou 310012 China
Tel:+86-571-88808760  Phone:13805791085  Email:lock@tkindustrial.cn  manager@tkindustrial.cn 
Copyright  ©  TOKING INTELLIGENT PRODUCTS (HANGZHOU) CO.,LTD
  All rights reserved.  Design By Leadong Sitemap